Sealless, Non-Metallic Pumps for Crucial Containment of Corrosive Liquids
 |
- PPS (Polyphenylene Sulfide)
|
|
The VI-CORR® Series external gear pumps are designed for low-flow metering or transfer of corrosive fluids such as water treatment chemicals.
Viking Mag Drive® Pumps use magnetic force passing through a statically sealed canister to drive the pump. This eliminates the need for a traditional dynamic shaft seal such as packing or mechanical seals. In turn, this eliminates the hazards and mess caused by leaking packing or mechanical seal failure, making this an ideal solution for:
- Hazardous liquids such as caustics or acids
- Flammable liquids such as fuels or alcohols
- Liquids which are difficult to seal such as resins or isocyanates used in polyurethane foam production
- Strong aromatics such as perfumes or mercaptum
- Expensive liquids such as heat transfer liquid or those used in pharmaceutical production
- Applications where seal failure is absolutely unacceptable such as pipeline sampling
- Pump locations which a leaking pump may cause a safety concern (near walkways or overhead)
In addition to the seal less, Mag Drive, these pumps are available in lip seal and mechanically sealed versions. They are available with foot mount or C-flange motor mount. Integral pressure relief valves are standard.
Viking Pump introduced the first commercially available Magnetically Coupled gear pump over 2 decades ago, and has built on that tradition with the widest offering of Mag Drive gear pumps available today including the Vi-Corr® Mag Drive, the Universal Mag Drive, the Composite
Mag Drive, and the high pressure Spur Gear Mag Drive Pump.
The Mag Drive VI-CORR® Series includes the following models:
- RP-80 - PPS Mechanically Sealed Pumps
|
| Capacity |
0 - 7 m³/hr |
0 - 32 GPM |
| Pressure |
0 - 14 BAR |
0 - 200 PSI |
| Viscosity |
0.1 - 5,500 cSt |
28 - 25,000 SSU |
| Temperature |
-40 - 95 C |
-40 - 200 F |
|
Specifications
|
Size
|
Standard Port**
|
Nominal Capacity at Maximum Speed
|
Maximum Speed
|
Maximum Pressure*
|
|
Inches
|
m³/hr
|
GPM
|
RPM
|
BAR
|
PSI
|
|
0782
|
2
|
1.8
|
8
|
1800
|
14
|
200
|
|
0716
|
2
|
3.6
|
16
|
1800
|
14
|
200
|
|
0724
|
2
|
5.5
|
24
|
1800
|
14
|
200
|
|
0732
|
2
|
7.3
|
32
|
1800
|
14
|
200
|
* Max. Differential Pressure
** Standard pump has male NPT ports, 1.5 inch flange ports are optional
