|
Hayward Magnetic Drive/Horizontal/Immersible Pumps |
 |
|
Hayward Magnetic Drive/Horizontal/Immersible Pumps |
|
 Aro Pumps
Barnes Pumps Caster Pumps Flux Pumps G & L Goulds Pumps Grundfos Pumps Gusher Pumps Hayward Industrial Helwig Pumps Pacer Pumps Pulsafeeder Pumps Promag Pumps Viking Pumps  
 |
 |
|
Using the latest, patented pump technology, Haywards Series R all-plastic, corrosion resistant pumps will stand up to the most aggressive, demanding industrial and commercial applications year in and year out. From the heavy duty, thick wall, glass reinforced polypropylene or PVDF pump body construction, to the rugged epoxy painted motors, to the patented design that helps guard against damage from dry running, there is simply no better mag drive plastic pump available anywhere. And Hayward backs every one of its Webster mag drive pumps with an extended two year warranty. 
The C5, C7 and C8 Series pumps are designed specifically for continuous chemical duty service. They are rugged, precision molded, and feature dynamically balanced, enclosed impellers. Units are available in CPVC (Corzan®), fiberglass reinforced Polypropylene, and PVDF (Solef® ) with ratings of 1/3, 1, and 1 1/2 horsepower. Pump models are also available with a rugged cast iron bearing frame for belt-drive or other coupled drivers.
The "S2, S4, S5, SS6, SS7and S8" Series are rugged, chemical duty pumps available in CPVC (Corzan®), fiberglass reinforced Polypropylene, and PVDF (Solef® ). Precision molded, dynamically balanced, "enclosed" impellers allow pumping of abrasive solutions, ability to run dry, and operating against closed discharge valve. Available in ratings of 1/3, 1/2, 3/4, 1, and 1 1/2 horsepower for continuous duty operation.
The SS8 Series are rugged, chemical duty pumps available in CPVC (Corzan®) or Fiberglass Reinforced Polypropylene. Precision molded, dynamically balanced, "enclosed" impellers allow pumping of abrasive solutions, ability to run dry, and operating against closed discharge valve. The pump can handle flow rates up to 80gpm and up to 45 TDH. These pumps feature a special tear-drop locking design that allows the operator to quickly remove the pump core for service while the pump body stays connected to the piping system. Just loosen the four mounting bolts, turn the pump motor slightly and lift it out of the body for service. Spillage of the process media is eliminated because the pump body stays connected to the piping system.
The D1 and DD1 are an enhanced replacement of the durable S1 and SS1 series pump. A 1/8" HP motor with 1/2" diameter extended shaft and (4) precision machined, pump mounting pads, insure trouble free performance for the more demanding industrial applications. 
Designed for the most demanding applications these all plastic cartridge filters are used to filter fine particles from the process fluid. Models are available to accommodate 10, 20 and 30 wound or pleated polypropylene filter cartridges in either PVC or CPVC construction. Both come standard with a Viton® seal. The filters are designed so that compression seals the filter unit eliminating the need for a center rod. An integral plug on the hand removable filter cover makes for easy bleeding of the unit. The filters feature a 3/4 FPT inlet connection to eliminate the chance for broken MPT connections. An optional mounting base is available for mounting the filter to the floor or work surface. 
Designed to filter process fluid within a tank eliminating the time and expense needed to install a separate, stand alone, filter and pump. The filter features all plastic, CPVC construction with Viton® for exceptional chemical resistance and are available with either one or two filter cartridges.