 |
 |
| Stainless Steel Centrifugal Pumps |
| |
 3657/3757
- Superior Materials of Constructions: Precision investment cast 316 stainless steel liquid end components for corrosion resistance and strength.
- Frame Mounted Design: Flexibility of installation and driver arrangements.
- Enclosed Impeller Design: Maximum efficiency and service life with no need for clearance adjustment. Key driven shaft connection with locknut.
- Back Pull-Out Design: Simplifies maintenance by allowing the casing to remain in the piping during disassembly.
- Close-Coupled Design: Compact design saves space and simplifies installation.
- Casing features: Investment cast AISI type 316 stainless steel, volute design for maximum efficiency. Vertical discharge standard, field modifiable to four standard positions.
- Shaft and Sleeve: High strength steel, keyed design non-wetted. Protected from pumpage by O-ring seal and hooked design AISI type 316 stainless steel shaft sleeve.
- Mechanical Seals: Standard John Crane Type 21 seal with carbon versus ceramic faces, Viton elastomers and 316 stainless steel metal components. Options are available for high temperature and mild abrasives.
- Drive Motors: NEMA standard JM frame (close coupled) or T frame (frame mounted) are available in both single and three phase with a variety of enclosures and voltages to match your service requirements.
 Product Bulletin
Instruction Manual
 | top | Back To G & L Pumps
|
| |
 ICS/ICSF
- Superior Materials of Construction: Precision investment cast 316 stainless steel liquid end components for corrosion resistance and strength.
- Frame Mounted Design: Flexibility of installation and driver arrangements.
- Open Impeller Design: Spherical handling to 3/8" reduces chance of clogging and required maintenance time.
- Back Pull-Out Design: Simplifies maintenance by allowing the casing to remain in the piping during disassembly.
- Close-Coupled Design: Compact design saves space and simplifies installation.
- Casing Features: Investment cast 316 stainless steel construction with NPT threaded suction and discharge, optional drain and vent with stainless steel plugs. Four position discharge orientation.
- Mechanical Seals: Standard John Crane Type 21 seal with carbon versus ceramic faces, Viton elastomers and 316 stainless steel metal parts. Optional seals are available for high temperature and mild abrasive services.
- Drive Motors: NEMA standard 56J frame motors with rugged ball bearing design for continuous duty. Versions are available in both single and three phase with a variety of enclosures and voltage to match your service requirements.
Product Bulletin
Instruction Manual
| top | Back To G & L Pumps
|
| |
 MCS Product Bulletin
Instruction Manual
| top | Back To G & L Pumps |
| |
 NPE 316L SS
- High Efficiency Impeller: Enclosed impeller with unique floating seal ring design maintains maximum efficiencies over the life of the pump without adjustment.
- Mechanical Seal: Standard John Crane Type 21 with carbon versus silicon-carbide faces, Viton elastomers, and 316 stainless metal parts. Optional high temperature and chemical duty seals available.
- Motors: NEMA standard open drip-proof, totally enclosed fan cooled or explosion proof enclosures. Rugged ball bearing design for continuous duty under all operating conditions.
- Superior Materials of Construction: Complete AISI 316L stainless steel liquid handling components and mounting bracket for corrosion resistance, quality appearance, and improved strength and ductility.
- Casing and Adapter Features: Stainless steel construction with NPT threaded, centerline connections, easily accessible vent, prime and drain connections with stainless steel plugs. Optional seal face vent/flush available.
Product Bulletin
Instruction Manual
| top | Back To G & L Pumps
|
| |
 NPO
- The NPO pump from G&L has been designed with exclusive technical benefits to serve the needs of manufacturers in a wide variety of washer applications.
- Complete AISI 316L stainless steel liquid handling components and mounting bracket for corrosion resistance, quality appearance and improved strength and ductility.
- Open impeller design passes up to 3/8" solids including food particles, lint, metal filings, and other wash residue.
- Stainless steel construction with NPT threaded, centerline connections, easily accessible vent, prime and drain connections with stainless steel plugs. Optional seal face vent/flush available.
- Close-coupled design saves space and simplifies maintenance and installation.
- NEMA standard open drip proof, totally enclosed fan cooled or explosion proof motors with rugged ball bearing design.
- Standard John Crane type 21 mechanical seals with carbon versus ceramic faces and viton elastomers. Optional high temperature and chemical duty seals available.
- The NPO can be installed in either a horizontal or vertical position. An optional seal chamber vent is available.
Product Bulletin
Instruction Manual
| top | Back To G & L Pumps |
| |
 SSH-S and M-Group and SSH-F,C submittals
Superior Materials of Construction: AISI Type 316L stainless steel pump parts for reduced corrosion and improved strength and ductility. Frame Mounted Design: Flexibility of installation and driver arrangements. Back Pull-Out Design: Simplifies maintenance when used with spacer type coupling. Cast Iron Power Frame: Rigidly supported, grease lubricated ball bearing assembly. Mechanical Seal: Standard John Crane Type 21 mechanical seal. Drive Motors: Standard NEMA design T-frame or JM motors in single or three phase. Suction and Discharge Flanges: Mate with ANSI class 150 flanges. Close-Coupled Design: Compact design saves space and simplifies maintenance.
Product Bulletin
Instruction Manual
| top | Back To G & L Pumps |
|
|
